User Manual Q&AAnswer
Jan 07, 2025 - 10:38 PM
To set the alarm on the VTech Kidi Magic Light Projector Speaker Clock, follow these steps:
1. Press the Alarm/Settings button on the device. This will take you to the alarm settings menu.
2. Use the Direction Buttons to select the desired alarm (Alarm 1 or Alarm 2). Press the OK Button to confirm your selection.
3. Once you have selected the alarm, you will see the alarm time displayed on the screen. Use the Direction Buttons to adjust the hours and minutes of the alarm time.
4. Press the OK Button to move to the next setting. You can adjust the AM/PM setting (available only in 12-hour mode), turn the alarm on/off, and select the ringtone.
5. To save the current settings, press the OK Button when highlighting the check mark icon. If you want to make any changes, you can press the Direction Buttons to go back and choose the edit icon to set the alarm again.
Note: To stop the alarm from ringing, choose the alarm icon and press the OK Button. When the alarm is ringing, you can also press any activity button or wave your hand above the unit to activate the snooze mode. The alarm will ring again after five minutes for up to three times.
For more detailed instructions and information, please refer to the VTech Kidi Magic Light Projector Speaker Clock user guide.
Add New Comment