User Manual Q&AAnswer
Jan 07, 2025 - 10:36 PM
To connect the Sangean WFR-32 Wi-Fi Internet Radio to your home Wi-Fi network, follow these steps:
1. Power on the radio by pressing the power button located on the top panel.
2. Press the Menu button on the top panel to enter the main menu.
3. Use the Tune/Select xxxx to navigate to the "Network Setup" option and press the Tune/Select xxxx to enter the network setup menu.
4. In the network setup menu, use the Tune/Select xxxx to select "Wi-Fi Setup" and press the Tune/Select xxxx to enter the Wi-Fi setup submenu.
5. In the Wi-Fi setup submenu, use the Tune/Select xxxx to select "Scan" and press the Tune/Select xxxx to start scanning for available Wi-Fi networks.
6. Once the scan is complete, a list of available Wi-Fi networks will be displayed on the screen. Use the Tune/Select xxxx to select your desired network and press the Tune/Select xxxx to proceed.
7. If your Wi-Fi network is secured, you will be prompted to enter the network password. Use the Tune/Select xxxx to select the characters and press the Tune/Select xxxx to confirm each character. Use the Tune/Select xxxx to navigate between characters and the arrow buttons to move the cursor. Once the password is entered, press the Tune/Select xxxx to connect to the network.
8. If the connection is successful, the radio will display the IP address assigned to it by the network. Press the Tune/Select xxxx to save the settings and exit the network setup menu.
Please note that the above steps are a general guideline, and the exact menu options and navigation may vary slightly based on the firmware version of your Sangean WFR-32 Wi-Fi Internet Radio. For more detailed instructions and troubleshooting information, refer to the user manual provided with the product.
Add New Comment