User Manual Q&AAnswer
Jan 07, 2025 - 10:06 PM
Setting up the NETGEAR AC1200 Orbi Whole Home Mesh WiFi System is a straightforward process. Here is a step-by-step guide based on the user manual:
1. Unpack the Orbi Router and Orbi Satellite: Start by unpacking the Orbi Router (RBR10) and Orbi Satellite (RBS10) from the package.
2. Connect the Orbi Router: Plug the provided power adapter into the power port on the Orbi Router and connect the other end to an electrical outlet. Ensure that the power LED on the router lights up.
3. Connect the Orbi Satellite: Place the Orbi Satellite in a central location within your home. Plug the provided power adapter into the power port on the Orbi Satellite and connect the other end to an electrical outlet. Wait for the satellite's power LED to light up.
4. Connect the Orbi Router to your modem: Use the included Ethernet cable to connect the yellow Internet port on the Orbi Router to the Ethernet port on your modem. Ensure a secure connection.
5. Power on your modem: Turn on your modem and wait for it to establish an internet connection. This may take a few minutes.
6. Connect to the Orbi network: On your computer or mobile device, locate the available WiFi networks and connect to the one named "NETGEAR Orbi." The default WiFi network name (SSID) and password (network key) can be found on the label of your Orbi Router.
7. Complete the setup process: Open a web browser on your connected device and enter "http://orbilogin.com" or "http://192.168.1.1" in the address bar. Follow the on-screen instructions to complete the setup process, including creating a new admin password and updating the firmware if prompted.
8. Place the Orbi Satellite: After completing the setup, you can place the Orbi Satellite in an optimal location within range of the Orbi Router. The satellite should be positioned where it can provide the best WiFi coverage throughout your home.
That's it! Your NETGEAR AC1200 Orbi Whole Home Mesh WiFi System should now be set up and ready to use. For more detailed instructions and troubleshooting information, refer to the user manual provided in the link you shared.
Add New Comment