User Manual Q&AAnswer
Jan 07, 2025 - 09:34 PM
To connect the Earthquake Sound Q10B tactile transducer to an amplifier, follow these steps:
1. Make sure the amplifier's front toggle switch is set to "LOWPASS" before connecting the tactile transducer.
2. Gather the necessary tools and supplies for installation, including 16 to 12-gauge speaker cable, a pair of pliers, a powered screwdriver, a measuring tape, and two wing nut wire connectors or electrical tape.
3. Locate the LFE output on your receiver or amplifier. This is typically located at the back of the unit.
4. Connect one end of the speaker cable to the LFE output of your amplifier.
5. Connect the other end of the speaker cable to the input terminals of the Q10B tactile transducer. Ensure a secure connection using the wing nut wire connectors or electrical tape.
6. Once the connections are made, power on your amplifier and adjust the settings as desired.
By following these steps and referring to the Earthquake Sound Q10B user guide, you can properly connect the tactile transducer to your amplifier and enjoy an enhanced audio experience.
Add New Comment