User Manual Q&AAnswer
Jan 07, 2025 - 08:59 PM
To program channels on the Kenwood ProTalk NX-P1302AU UHF Two-Way Portable Radio, please follow the steps below:
1. Turn on the radio by rotating the Power/Volume xxxx clockwise.
2. Press the Menu button to enter the menu mode.
3. Use the Up or Down arrow buttons to navigate to the "Channel" option and press the Menu button to select it.
4. Use the Up or Down arrow buttons to select the desired channel number.
5. Press the Menu button to confirm the channel selection.
6. Use the Up or Down arrow buttons to navigate to the "Frequency" option and press the Menu button to select it.
7. Use the Up or Down arrow buttons to enter the desired frequency for the selected channel.
8. Press the Menu button to confirm the frequency selection.
9. Repeat steps 4 to 8 for programming additional channels.
10. Once all the desired channels are programmed, press the Menu button to exit the menu mode.
Please note that the specific steps may vary slightly depending on the firmware version of your Kenwood ProTalk NX-P1302AU UHF Two-Way Portable Radio. For more detailed instructions and illustrations, please refer to the user manual provided with the product.
Add New Comment