User Manual Q&AAnswer
Jan 07, 2025 - 08:17 PM
To paint the grilles of the Polk Audio 900-LS 3-Way Loudspeaker, follow these steps:
1. Elevate the Sheer-Grille off of a flat surface to ensure even coverage of the grille frame. You can use a single spray can cap to raise the grille high enough.
2. Hold the spray paint about 12" from the grille and at a 45° angle.
3. Apply one light, thin coat, moving evenly side to side over the grille. Work your way around the perimeter of the grille to ensure you cover the grille frame.
4. After each application of paint, wait approximately 1 minute, rotate the grille 90°, and apply the next thin coat. Make sure to rotate the grille in the same direction of travel.
5. Three light, even applications should cover the grille and frame adequately. Remember to work your way around the grille frame to cover it evenly and completely.
Important Note: Do not remove the grille scrim before painting, and never use a brush or roller to paint the grilles as this will clog the perforated holes.
Please refer to the Polk Audio 900-LS 3-Way Loudspeaker Instruction Manual for more detailed instructions and safety guidelines.
Add New Comment