User Manual Q&AAnswer
Jan 07, 2025 - 08:13 PM
To pair the PORUIS IPX7 Dog Training Collar with the remote control, please follow the steps below:
1. Ensure that both the collar receiver and the remote control are fully charged.
2. Press and hold the power button on the remote control for 3 seconds to turn it on.
3. Press the mode button on the remote control to select the desired training mode (e.g., vibration, beep, or static shock).
4. Press and hold the power button on the collar receiver until the indicator light starts flashing.
5. Within 10 seconds, press the mode button on the remote control to send a signal to the collar receiver.
6. The collar receiver will emit a beep sound and the indicator light will stop flashing, indicating that the pairing is successful.
Note: If the pairing is not successful, please repeat the steps above. Make sure that the remote control and collar receiver are within range and there are no obstacles blocking the signal.
For more detailed instructions and illustrations, please refer to the "Pairing the Collar Receiver with the Remote Control" section in the PORUIS IPX7 Dog Training Collar User Manual, which can be accessed using the provided link.
Add New Comment