User Manual Q&AAnswer
Jan 07, 2025 - 04:57 AM
To connect your device to the NexiGo PJ10 1080P LCD Projector, follow these steps:
1. Check the available ports on the projector. The NexiGo PJ10 1080P LCD Projector provides multiple input options, including HDMI, VGA, USB, AV, and SD card.
2. Determine the type of connection your device supports. Most devices, such as laptops, smartphones, and gaming consoles, have HDMI or VGA outputs. If your device has a different output, you may need an adapter or converter to connect it to the projector.
3. For HDMI connection:
a. Use an HDMI cable to connect the HDMI output of your device to the HDMI input of the projector.
b. Make sure the projector is turned on and set to the correct HDMI input source.
c. On your device, go to the display settings and select the appropriate display mode (e.g., duplicate or extend).
4. For VGA connection:
a. Use a VGA cable to connect the VGA output of your device to the VGA input of the projector.
b. Make sure the projector is turned on and set to the correct VGA input source.
c. On your device, go to the display settings and select the appropriate display mode (e.g., duplicate or extend).
5. For USB, AV, or SD card connection:
a. Insert the USB flash drive, AV cable, or SD card into the corresponding ports on the projector.
b. Use the projector's remote control or on-screen menu to navigate and select the desired media source.
For more detailed instructions and illustrations, please refer to the NexiGo PJ10 1080P LCD Projector User Manual provided in the link you provided.
Add New Comment