User Manual Q&AAnswer
Jan 07, 2025 - 04:53 AM
To connect your Epson 450Wi Multimedia Projector to your computer, follow these steps:
1. Ensure that your computer and projector are powered off.
2. Locate the computer video cable that came with your projector. It should have a blue connector on one end and a VGA or HDMI connector on the other end, depending on your computer's video output.
3. Connect one end of the computer video cable to the blue Computer1 (VGA) or HDMI port on the back of the projector.
4. Connect the other end of the computer video cable to the corresponding video output port on your computer.
5. If you are using an HDMI connection, make sure to also connect the audio cable from your computer's audio output to the projector's Audio In port.
6. Once the connections are made, power on your computer and projector.
7. On your computer, go to the display settings and select the appropriate display mode for the projector. This may involve extending or duplicating your desktop.
8. Use the projector's remote control or control panel to select the Computer1 (VGA) or HDMI input source.
9. Adjust the focus and other image settings as needed using the projector's controls.
For more detailed instructions and troubleshooting tips, please refer to the Epson 450Wi Multimedia Projector User's Guide.
Add New Comment