User Manual Q&AAnswer
Jan 07, 2025 - 04:39 AM
To pair the ILive ISBW249B Resistant Wireless Speaker with your device, follow these steps:
1. Make sure the speaker is turned on and in Bluetooth pairing mode. Press and hold the Power button for nine seconds until the indicator starts rapidly flashing blue and a voice prompt announces the Bluetooth connection.
2. On your phone or tablet, go to the Bluetooth settings and make sure Bluetooth is turned on.
3. In the Bluetooth settings, search for available devices. You should see "ISB19" listed as an available device. Select it to initiate the pairing process.
4. Keep your device within 3 feet of the speaker during the pairing process to ensure a stable connection.
5. Once the pairing is successful, the voice prompt will announce the Bluetooth connection, and the indicator light on the speaker will stop flashing and remain solid blue.
If you have followed these steps and are still unable to pair your device with the speaker, try the following troubleshooting tips:
- Turn off Bluetooth on your device and then turn it back on before attempting to pair again.
- Ensure that there are no other devices connected to the speaker via Bluetooth. Disconnect any other devices and try pairing again.
- Reset the speaker to its default settings by pressing the Alexa Mute button for 10 seconds. This will clear any previous pairing information and allow you to start fresh.
- If none of the above steps work, refer to the warranty and support information provided in the manual for further assistance from the manufacturer.
Please note that the above instructions are based on the information provided in the ILive ISBW249B Resistant Wireless Speaker user manual.
Add New Comment