User Manual Q&AAnswer
Jan 07, 2025 - 04:10 AM
To program channels into the ICOM IC-M73 01 Handheld VHF Marine Radio, please follow the steps below:
1. Turn on the radio by rotating the power/volume xxxx clockwise.
2. Press the [CH/WX] button to select the desired channel group (USA, INT, CAN, WX).
3. Use the up/down arrow buttons to select the desired channel number.
4. Press and hold the [FUNC] button for 1 second to enter the programming mode.
5. Use the up/down arrow buttons to select the desired frequency digit.
6. Use the left/right arrow buttons to change the selected digit.
7. Repeat steps 5 and 6 to set the frequency for each digit.
8. Press the [FUNC] button to move to the next digit.
9. Repeat steps 5-8 to set the frequency for all digits.
10. Press the [FUNC] button to save the programmed frequency.
11. Repeat steps 3-10 to program additional channels.
12. Press the [CH/WX] button to exit the programming mode.
Please note that the ICOM IC-M73 01 Handheld VHF Marine Radio user guide provides detailed instructions and illustrations for programming channels, including additional features and settings. It is recommended to refer to the user guide for further information and troubleshooting.
Add New Comment