User Manual Q&AAnswer
Jan 07, 2025 - 03:56 AM
To adjust the illumination on the AmScope M150C-MS Compound Monocular Microscope, follow these steps:
1. Locate the dimmer xxxx on the side of the base of the microscope.
2. Turn the dimmer xxxx slowly to adjust the amount of light.
3. Start with a low setting and gradually increase the brightness until the desired illumination is achieved.
4. Observe the specimen through the eyepiece and adjust the dimmer xxxx as needed to optimize the lighting for clear visibility.
Note: The dimmer xxxx controls the amount of light that escapes from the base lens. By adjusting this xxxx , you can control the intensity of the light source and achieve the desired brightness for your observations.
Add New Comment