User Manual Q&AAnswer
Jan 07, 2025 - 03:44 AM
To connect your EPSON PowerLite 730c projector to your computer, please follow these steps:
1. Ensure that both the projector and your computer are turned off.
2. Locate the VGA or HDMI port on your computer. The VGA port is a 15-pin connector, while the HDMI port is a smaller rectangular connector.
3. Connect one end of the VGA or HDMI cable to the corresponding port on your computer.
4. Locate the VGA or HDMI port on the back of the projector.
5. Connect the other end of the VGA or HDMI cable to the corresponding port on the projector.
6. Turn on your computer and then turn on the projector.
7. On your computer, go to the display settings. This can usually be done by right-clicking on the desktop and selecting "Display settings" or "Screen resolution."
8. In the display settings, select the option to extend or duplicate the display to the projector. This will vary depending on your operating system.
9. Adjust the projector settings if necessary. You can refer to the EPSON PowerLite 730c projector user guide for detailed instructions on adjusting settings such as brightness, contrast, and aspect ratio.
By following these steps, you should be able to successfully connect your EPSON PowerLite 730c projector to your computer and display your computer's screen on the projector. For more detailed information and troubleshooting tips, please refer to the user guide provided with the projector.
Add New Comment