User Manual Q&AAnswer
Jan 07, 2025 - 03:38 AM
To connect your laptop to the Epson PowerLite 1925W WXGA Business Projector, follow these steps:
1. Make sure your laptop and the projector are both turned off.
2. Locate the VGA or HDMI port on your laptop. The type of port will depend on your laptop model.
3. Connect one end of the VGA or HDMI cable to the corresponding port on your laptop.
4. Locate the VGA or HDMI input port on the back of the projector.
5. Connect the other end of the VGA or HDMI cable to the input port on the projector.
6. Turn on your laptop and the projector.
7. On your laptop, press the appropriate key combination (usually Fn + F4, Fn + F7, or Fn + F8) to switch the display output to the projector. Refer to your laptop's user manual for the specific key combination.
8. The projector should now display the content from your laptop. Adjust the focus and other settings on the projector as needed.
For more detailed instructions and troubleshooting tips, please refer to the Epson PowerLite 1925W WXGA Business Projector User Guide provided in the link above.
Add New Comment