User Manual Q&AAnswer
Jan 07, 2025 - 03:05 AM
To connect your speakers to the ELAC EA101EQ-G Integrated Amplifier, follow these steps:
1. Strip approximately 1/2 to 3/4 of an inch off the ends of your speaker wire and twist the strands together.
2. On the rear panel of the amplifier, turn the clear ends of the Speaker Terminals counterclockwise to create enough room to feed the stripped wire through the post hole.
3. Feed the stripped wire through the post hole and confirm the polarity (red wire to +).
4. Turn the clear ends clockwise to tighten the post and secure the wire.
5. Repeat the above steps for the left and right speakers, ensuring the correct polarity.
6. Connect the speaker wires to the appropriate + and - terminals on the speakers.
Please refer to the "Speaker Connections" section of the ELAC EA101EQ-G Integrated Amplifier User Manual for more detailed instructions and illustrations.
Add New Comment