User Manual Q&AAnswer
Jan 07, 2025 - 02:53 AM
To program the electronic dosing settings on the La-Pavoni Pub-1V-B Electronic Dosing Espresso Machine, please follow the steps below:
1. Ensure that the machine is turned on and the power switch is in the "ON" position.
2. Press and hold the "PROGRAM" button for a few seconds until the display shows "P1" (Program 1).
3. Use the "+" and "-" buttons to set the desired dose for Program 1. The dose can be adjusted in 0.1-second increments.
4. Once the desired dose is set, press the "PROGRAM" button again to save the setting. The display will show "P2" (Program 2).
5. Repeat steps 3 and 4 to set the desired dose for Program 2.
6. You can program up to 4 different doses using Programs 1 to 4. Follow the same steps to set the doses for the remaining programs.
7. To use the programmed doses, simply press the corresponding program button (1 to 4) on the front panel. The machine will automatically dispense the programmed dose.
Note: If you want to change the programmed doses, you can repeat the programming steps above. Press and hold the "PROGRAM" button for a few seconds, adjust the dose using the "+" and "-" buttons, and press the "PROGRAM" button again to save the new setting.
For more detailed instructions and illustrations, please refer to the La-Pavoni Pub-1V-B Electronic Dosing Espresso Machine User Manual, specifically the section on programming the electronic dosing settings.
Add New Comment