How do I set the alarm on the Naxa Electronics NRC-182 Dual Radio Alarm Clock? (NAXA Electronics NRC-182 Dual Alarm Clock Radio User Guide)

Answer

manuals.plus

Jan 07, 2025 - 02:42 AM


To set the alarm on the Naxa Electronics NRC-182 Dual Radio Alarm Clock, follow these steps:

1. Make sure the power is off before setting the alarms. Press and hold the power button (c!>) to turn off the power.
2. Press the v- (AL1) button to set the alarm 1 mode to the buzzer, FM, or off. The Alarm 1 LED indicators will light for the buzzer or FM mode. The alarm is off if all indicators are off.
3. Press and hold the v- (AL1) button; the time for ALARM 1 will begin to flash.
4. Press the HOUR button to adjust the hour. Take note of the PM indicator when setting the hour.
5. Press the MIN button to adjust the minutes.
6. Press the v- (AL1) button again to change the daily repeat mode of ALARM 1.
7. Press the buttons to adjust the repeat mode. Select d1-d7 to have the alarm sound every day. Select d1-d5 to have the alarm sound on weekdays only (e.g., Monday to Friday). Select d6-d7 to have the alarm sound on weekends only (e.g., Saturday and Sunday).
8. Press the v- (AL1) button to save and exit the setting mode for ALARM 1.
9. To set ALARM 2, press the v+ (AU) button instead of the v- (AL1) button in the instructions above.

Note: You can also press the SNOOZE/SLEEP button when the alarm is sounding to stop the alarm and have it sound again automatically after 9 minutes. To turn off the alarm for the day, press the power button (c!>) when the alarm sounds. The alarm indicators will remain unchanged, and the alarm will sound again as scheduled.