User Manual Q&AAnswer
Jan 07, 2025 - 02:40 AM
There are a few possible reasons why the sound is only coming out of one speaker on your Jensen JTA-230R turntable. Here are some troubleshooting steps you can try:
1. Check the speaker connections: Make sure that the speaker wires are securely connected to the appropriate terminals on the back of the turntable. Ensure that the positive (+) and negative (-) terminals are matched correctly.
2. Balance adjustment: The turntable has a balance adjustment control xxxx located on the front panel. Make sure that the balance control is set to the center position. If it is turned all the way to one side, it may cause the sound to be biased towards one speaker.
3. Test with different records: Try playing different records to see if the issue persists. It is possible that the issue is specific to certain records that may have been recorded or pressed unevenly.
4. Test with different speakers: If possible, try connecting different speakers to the turntable to see if the issue is with the speakers themselves. This will help determine if the problem lies with the turntable or the speakers.
5. Contact customer support: If the issue persists after trying the above steps, it is recommended to contact Jensen customer support for further assistance. They will be able to provide more specific troubleshooting steps or guide you through the warranty process if necessary.
Please refer to the user manual for more detailed instructions on troubleshooting and setting up the Jensen JTA-230R turntable.
Add New Comment