User Manual Q&AAnswer
Jan 07, 2025 - 01:57 AM
To properly measure your blood pressure using the Sejoy BSP-22 Blood Pressure Monitor Wrist BP, follow these steps:
1. Preparation before measurement:
- Remove any jewelry from your hand.
- Avoid eating, drinking alcohol or caffeinated beverages, smoking, exercising, or bathing for 30 minutes prior to taking a measurement.
- It is best to take a reading on bare skin, so pull up long sleeves.
2. Tighten the cuff properly:
- Wrap the cuff around your wrist, attaching it to itself with the hook-and-loop fastener.
- The display should be on your inner wrist, as your pulse is strongest there.
3. Rest your wrist at heart level:
- For an accurate reading, place your arm on a pillow or similar surface.
- The monitor should be at the same level as your heart for the best reading.
4. Start measuring:
- Do not move while the cuff inflates and deflates.
- Take two or three readings approximately a minute apart to get an average.
- Record your readings with the time/date stamp function.
It is important to follow these steps carefully to ensure accurate blood pressure measurements. For more detailed instructions and information, please refer to the user manual provided with the Sejoy BSP-22 Blood Pressure Monitor Wrist BP.
Add New Comment