User Manual Q&AAnswer
Jan 07, 2025 - 01:31 AM
To connect speakers to the Teac AX-501 Integrated Amplifier, follow these steps:
1. Make sure the power is turned off and the unit is unplugged.
2. Identify the positive (+) and negative (-) terminals on the back of the amplifier.
3. Remove about 1 cm (0.4") of the sheath at the end of the speaker cable and twist the cable core well.
4. Turn the terminal cap on the amplifier's speaker terminals counterclockwise to loosen it.
5. Insert the wire into the hole in the terminal xxxx and turn the terminal cap clockwise to connect it securely. Make sure the cable sheath does not touch the terminal.
6. Repeat the above steps for the other speaker, connecting it to the corresponding speaker terminals on the amplifier.
7. Make sure the speaker cables are securely connected by gently pulling on them.
8. Once the speakers are connected, you can turn on the amplifier and adjust the volume to your desired level.
Please refer to the Teac AX-501 Integrated Amplifier User Guide for more detailed instructions and illustrations on speaker connections.
Add New Comment