User Manual Q&AAnswer
Jan 07, 2025 - 01:04 AM
To connect your QSC K10.2 loudspeaker to a powered mixer, follow these steps:
1. Make sure both the powered mixer and the QSC K10.2 loudspeaker are turned off and unplugged from the power source.
2. Locate the output jacks on your powered mixer. These are usually labeled as "Main Out" or "Speaker Out."
3. Take an XLR or 1/4" cable (depending on the output jacks of your powered mixer) and connect one end to the output jack of the powered mixer.
4. Locate the input jacks on the QSC K10.2 loudspeaker. These are usually labeled as "Input A" or "Input B."
5. Take the other end of the cable and connect it to the corresponding input jack on the QSC K10.2 loudspeaker. If you are using an XLR cable, match the XLR connector to the XLR input jack. If you are using a 1/4" cable, match the 1/4" connector to the 1/4" input jack.
6. Once the cable is securely connected, turn on the powered mixer and set the output level to an appropriate level.
7. Turn on the QSC K10.2 loudspeaker and adjust the volume control on the loudspeaker to the desired level.
8. Test the connection by playing audio through the powered mixer. You should hear the sound coming out of the QSC K10.2 loudspeaker.
Note: It is important to ensure that the output level of the powered mixer is not too high to avoid damaging the loudspeaker. Refer to the user manual of your powered mixer for specific instructions on setting the output level.
For more detailed information and illustrations, please refer to the user manual of the QSC K10.2 loudspeaker.
Add New Comment