User Manual Q&AAnswer
Jan 07, 2025 - 12:59 AM
To connect your Epson PowerLite 109W LCD Projector to your computer, follow these steps:
1. Ensure that your computer and projector are turned off.
2. Locate the computer video cable (VGA cable) that came with your projector.
3. Connect one end of the VGA cable to the VGA port on your computer.
4. Connect the other end of the VGA cable to the Computer/Component Video port on the projector.
5. Turn on your computer and wait for it to fully boot up.
6. Turn on the projector by pressing the Power button on the remote control or the projector control panel.
7. On your computer, go to the display settings. The method to access display settings may vary depending on your operating system.
8. Select the appropriate display mode for the projector. For example, on Windows, you can go to Display Settings > Multiple Displays and choose "Duplicate" or "Extend" to display your computer screen on the projector.
9. Adjust the projector settings as needed using the remote control or the projector control panel.
For more detailed instructions and troubleshooting tips, please refer to the Epson PowerLite 109W LCD Projector User Guide provided in the link above.
Add New Comment