How do I connect my device to the Hitachi CP-AX2505 XGA Ultra Short Throw Projector? (Hitachi ‎CP-AX2505 XGA Ultra Short Throw Projector Operating Guide)

Answer

manuals.plus

Jan 07, 2025 - 12:14 AM


To connect your device to the Hitachi CP-AX2505 XGA Ultra Short Throw Projector, you can use either an HDMI or VGA cable, depending on the available ports on your device. Here's a step-by-step guide:

1. Identify the available ports on your device (e.g., laptop, computer, DVD player, etc.). If your device has an HDMI port, it is recommended to use an HDMI cable for the best video and audio quality. If your device only has a VGA port, you will need a VGA cable for video and a separate audio cable for audio.

2. Locate the corresponding ports on the back of the projector. The Hitachi CP-AX2505 XGA Ultra Short Throw Projector has multiple input ports, including HDMI, VGA, and audio.

3. Connect one end of the HDMI or VGA cable to the port on your device and the other end to the corresponding port on the projector. For HDMI, make sure to align the HDMI logo on the cable with the HDMI port on both the device and the projector.

4. If you are using a VGA cable, connect the audio cable (3.5mm jack) from your device's audio output to the "Audio In" port on the projector.

5. Once the connections are made, power on your device and the projector.

6. On the projector's remote control, press the "Input" button to select the input source corresponding to the port you connected your device to (e.g., HDMI 1, VGA, etc.). You can also use the "Source" button on the projector itself.

7. Your device's screen should now be displayed on the projector. If not, make sure your device's display settings are set to extend or duplicate the screen to the projector.

For more detailed instructions and troubleshooting tips, please refer to the Hitachi CP-AX2505 XGA Ultra Short Throw Projector Operating Guide provided in the link you shared.