User Manual Q&AAnswer
Jan 06, 2025 - 11:55 PM
To connect your Pyle PLMRBT65W Bluetooth speakers to your device, follow these steps:
1. Connect the active speaker to a power source using a 12V cable. Make sure to install a power switch and a 10amp fuse between the power and active speaker for safety.
2. Turn on Bluetooth on your phone or tablet.
3. Select the Bluetooth connection name "Pyle USA" from the available devices.
4. Once connected, you will hear a connection tone and a blue light will illuminate on the active speaker.
5. If the Bluetooth connection is lost, you will hear a disconnection tone and the red light will illuminate on the active speaker.
Note: The active speaker will stay at green light illumination when using the RCA AUX-IN option. When Bluetooth is connected, the Bluetooth signal takes priority.
You can also use the included speaker wire to daisy chain the connection between the active and passive speakers to create a complete stereo system. Additionally, the speakers have RCA low-level inputs for connecting external devices even when Bluetooth is disconnected.
For more information and detailed instructions, please refer to the user manual provided with the product.
Add New Comment