User Manual Q&AAnswer
Jan 06, 2025 - 11:52 PM
To connect the SereneLife IPCAMHD82 Indoor Wireless IP Camera to your Wi-Fi network, you can follow the instructions provided in the user manual. Here is a step-by-step guide:
1. Make sure you are in the same room as your wireless router and plug the camera into power.
2. Open the SereneViewer app on your mobile device and create an account or sign in if you already have one.
3. In the app, go to the "Device List" and click the '+' icon at the top left corner to add a new device.
4. Scan the device ID QR code using the app.
5. There are two methods to connect to your network: Wired Setup and Wi-Fi Connection.
Wired Setup:
- Connect the camera to power and an Ethernet cable.
- Wait for the indicator on the camera to flash green.
- After scanning the QR code, deselect the "Ethernet Connection" option in the app.
Wi-Fi Connection:
- Make sure the camera is plugged into power.
- Wait for the camera to boot up (1-2 minutes) and scan the QR code.
- Watch for the Wi-Fi indicator on the front of the camera to flash red and green alternating.
- Click the Wi-Fi connection icon in the app and follow the instructions.
6. Once the camera is connected to your Wi-Fi network, you can access it from any device with an internet browser by logging on to the website: http://cloud.serenelifehome.com/
If you encounter any issues during the setup process, please refer to the troubleshooting section in the user manual or contact SereneLife customer support for further assistance.
Add New Comment