User Manual Q&AAnswer
Jan 06, 2025 - 11:49 PM
To connect the Sunfire HRS10 subwoofer to your receiver, follow these steps:
1. Make sure both the subwoofer and the receiver are turned off before making any connections.
2. Locate the subwoofer output on your receiver. It is usually labeled as "Subwoofer Out" or "LFE Out".
3. Use an RCA cable to connect the subwoofer output on your receiver to the left input jack on the back of the Sunfire HRS10 subwoofer. If your receiver has a single subwoofer output, you can connect it to the left input jack only.
4. If your receiver has a separate subwoofer volume control, set it to the desired level. Otherwise, leave it at the default setting.
5. Plug in the power cord of the Sunfire HRS10 subwoofer and connect it to a power outlet.
6. Turn on your receiver and set the subwoofer output to "On" or "Enabled" in the receiver's settings menu.
7. Turn on the Sunfire HRS10 subwoofer using the power switch on the control panel. The power indicator light should turn on.
8. Adjust the volume control on the subwoofer to match the level of your other speakers. Start with a lower volume setting and gradually increase it until the bass sounds balanced with the rest of your audio.
9. Test the subwoofer by playing audio that contains deep bass. If the bass is too weak or too strong, you can adjust the crossover frequency and phase controls on the subwoofer to fine-tune the sound.
Please refer to the user manual for more detailed instructions and illustrations on connecting and adjusting the Sunfire HRS10 subwoofer.
Add New Comment