User Manual Q&AAnswer
Jan 06, 2025 - 11:44 PM
To install the Pyle PDICS64 Ceiling Wall Mount Speaker, follow these steps:
1. Start by determining the location where you want to install the speaker. Ensure that there is enough space in the ceiling or wall for the speaker to fit properly.
2. Use the provided overall cut-out template with dimensions of 10"(W) x 10"(H) x 2.8" to mark the cut-out area on the ceiling or wall.
3. Cut the marked area using appropriate tools, following the template dimensions.
4. Once the cut-out is complete, insert the speaker into the hole, making sure it fits securely.
5. Connect the speaker wires to the speaker terminals. Ensure that the positive (+) and negative (-) terminals are correctly matched with the corresponding wires.
6. If using the 100V transformer, connect it to the speaker according to the provided instructions. This is necessary for use with high-power systems.
7. Once the connections are made, secure the speaker to the ceiling or wall using the provided installation equipment. Make sure it is firmly in place.
8. Repeat the above steps for any additional speakers you wish to install.
9. After all the speakers are installed, connect the speaker wires to your audio system or amplifier.
10. Finally, turn on your audio system or amplifier and test the speakers to ensure they are functioning properly.
For more detailed instructions and illustrations, please refer to the Pyle PDICS64 Ceiling Wall Mount Speaker's instruction manual.
Add New Comment