User Manual Q&AAnswer
Jan 06, 2025 - 11:39 PM
To connect the MAXHUB Enther-Webcam 4K Video Conference System to your computer, follow these steps:
1. Check the accessories: Make sure you have the USB cable that came with the product. 2. Connect the webcam to your computer: Plug one end of the USB cable into the USB 2.0 port on the webcam and the other end into a USB port on your computer. 3. Install drivers (if necessary): In most cases, the webcam should work without any additional drivers. However, if your computer does not recognize the webcam, you may need to install the drivers provided with the product. Refer to the User Manual for instructions on driver installation. 4. Set up video conferencing software: Open your preferred video conferencing software (e.g., Zoom, Microsoft Teams, Google Meet) on your computer. Go to the settings or preferences section of the software and select the MAXHUB Enther-Webcam 4K Video Conference System as the default camera. 5. Test the webcam: Start a video call or join a meeting in your video conferencing software and check if the webcam is working properly. You should see your video feed from the webcam. Note: Make sure to adjust the webcam position and settings in the video conferencing software to get the desired framing and video quality. For more detailed instructions and troubleshooting tips, refer to the User Manual provided with the product.
Add New Comment