User Manual Q&AAnswer
Jan 06, 2025 - 10:47 PM
To connect your Pyle PHPD82B Bluetooth speaker to your device, please follow these steps:
1. Make sure the speaker is turned on and in Bluetooth mode. You can switch to Bluetooth mode by selecting the MODE button on the top panel of the speaker and then selecting BT (BT MODE).
2. On your smartphone or tablet, go to the Bluetooth settings. This can usually be found in the settings menu or by swiping down from the top of the screen and selecting the Bluetooth icon.
3. In the Bluetooth settings, search for available devices. You should see "PYLE USA" listed as an available device. Select it to begin the pairing process.
4. If prompted, enter the pairing code, which is usually "0000" for Pyle devices. Confirm the pairing on your device.
5. Once the pairing is successful, you should see a confirmation message on both your device and the speaker. The Bluetooth indicator on the speaker will stop flashing, indicating a successful connection.
6. You can now play audio from your device through the Pyle PHPD82B Bluetooth speaker. Adjust the volume on both your device and the speaker as needed.
Please note that the specific steps may vary slightly depending on your device's operating system. Refer to your device's user manual for more detailed instructions on Bluetooth pairing if needed.
Add New Comment