How do I set up the Bose 301 V Stereo Loudspeakers? (BOSE 301 V Stereo Loudspeakers User Manual)

Answer

manuals.plus

Jan 06, 2025 - 10:46 PM


Sure! Here are the step-by-step instructions for setting up the Bose 301 V Stereo Loudspeakers:

1. Unpack the carton: Carefully unpack the speakers and save all packing materials for possible future use. Check the carton contents to ensure everything is included.

2. Select the locations for your speakers: Place the left and right speakers on the left and right sides of your room, as you face them. Experiment with different locations to find the one that provides the best sound. Make sure to attach the self-adhesive rubber feet to the bottom surface of each speaker for added stability.

3. Choose the cord: Use the proper gauge (thickness) of speaker cord. Refer to the wire recommendations in the manual for guidance.

4. Prepare the cord: Strip approximately ½ inch of insulation from both wires of the speaker cord. Twist the bare end of each wire to prevent loose strands from touching across terminals.

5. Make the connections: Press the terminal tab on the back of each speaker to insert the appropriate wire. Connect one end of the cord to the right speaker and the other end to the RIGHT SPEAKER OUTPUT of your receiver. Repeat the same process for the left speaker and LEFT SPEAKER OUTPUT.

6. Test the speakers: Turn on your receiver and set it to MONO (monophonic) mode. Make sure all special effects are turned off and the balance control is set to the center position. Play some deep bass passages of music through the speakers. The sound should seem to come from a point between the two speakers, and the bass should be full and natural. If not, check the connections and repeat the test.

Once you have completed these steps, your Bose 301 V Stereo Loudspeakers should be properly set up and ready to use. For more detailed information and additional tips, please refer to the owner's manual provided with the product.