User Manual Q&AAnswer
Jan 06, 2025 - 09:54 PM
To connect your Pyle PDICBT256 Bluetooth Flush Mount In-wall speakers to a Bluetooth device, please follow the steps below:
1. Ensure that the Bluetooth device you want to connect to is within range of the speakers (typically around 33 feet or 10 meters).
2. Turn on your Bluetooth device and navigate to its settings menu.
3. On your Bluetooth device, search for available Bluetooth devices. This process may vary depending on the device, but it is usually found under the Bluetooth settings.
4. On the Pyle PDICBT256 speakers, press and hold the Bluetooth button until the LED indicator starts flashing. This indicates that the speakers are in pairing mode.
5. On your Bluetooth device, select the Pyle PDICBT256 speakers from the list of available devices. The speakers should appear as "PDICBT256" or a similar name.
6. Once selected, the speakers will attempt to pair with your Bluetooth device. This process may take a few seconds.
7. If prompted, enter the pairing code for the speakers. The default code is often "0000" or "1234", but refer to the user manual for the specific code for your speakers.
8. Once the pairing is successful, the LED indicator on the speakers will stop flashing and remain solid.
9. You should now be able to play audio from your Bluetooth device through the Pyle PDICBT256 speakers.
Note: If you have previously paired the speakers with another Bluetooth device, you may need to disconnect or unpair them before attempting to connect with a new device. Refer to the user manual for instructions on how to unpair the speakers.
If you encounter any issues during the pairing process, please refer to the troubleshooting section of the user manual or contact Pyle customer support for further assistance.
Add New Comment