User Manual Q&AAnswer
Jan 06, 2025 - 09:28 PM
To install the Pyle PLMR65C2B Two-Way Marine Speaker System, you will need the following tools: marine-grade speaker wire, wire crimper and stripper, zip ties, and mounting hardware. Here is a step-by-step guide to the installation process:
1. Choose the optimal mounting location for your speakers. For optimum sound quality, it is recommended to mount the speakers as high as possible and avoid mounting them near your feet or under seats. Consider installing speakers above your head on larger vessels if practical.
2. Once you have selected the mounting location, draw and cut out the mounting holes according to the speaker dimensions (93 x 3.66 x 6.93 inches).
3. Set up the boat's sound wire by running marine-grade speaker wire from the speaker location to the audio source or amplifier. Use a wire crimper and stripper to properly connect the wires.
4. Test out your speakers by connecting them to the audio source or amplifier. Ensure that they are functioning correctly before proceeding.
5. Once the speakers are tested, securely mount them using the provided mounting hardware. Follow the instructions in the manual for the specific mounting type, which is flush mount for the Pyle PLMR65C2B speakers.
By following these steps, you should be able to successfully install the Pyle PLMR65C2B Two-Way Marine Speaker System on your boat. For more detailed instructions and diagrams, please refer to the instructions manual provided with the product.
Add New Comment