How do I install the Herdio SZJW-HCS5022 5.25-inch 2-Way Ceiling Speakers? (Herdio SZJW-HCS5022 5.25-inches Ceiling Speakers User Guide)

Answer

manuals.plus

Jan 06, 2025 - 09:24 PM


To install the Herdio SZJW-HCS5022 5.25-inch 2-Way Ceiling Speakers, follow these steps:

1. Determine the location: Choose the desired location on the ceiling where you want to install the speakers. Ensure that there is enough space and clearance for the speakers.

2. Cut the mounting hole: Use the provided dimensions (Outside Facial Diameter: 7.28*7.28" / Mounting Hole Diameter: 5.87*5.87" / Mounting Depth: 2.83") to mark and cut the mounting hole in the ceiling. Be careful not to damage any electrical or structural components.

3. Connect the speaker wires: Run the speaker wires from your audio source or amplifier to the installation location. Strip the ends of the wires and connect them to the corresponding terminals on the back of the speakers. Ensure that the positive and negative terminals are correctly matched.

4. Mount the speakers: Place the speakers into the mounting holes and secure them using the provided mounting screws. Make sure they are flush with the ceiling surface.

5. Attach the grille: If desired, attach the removable grille to the front of the speakers. The grille can be painted to match the room's decor.

6. Test the speakers: Once the installation is complete, connect your audio source or amplifier to the speakers and test the sound output. Adjust the volume and settings as needed.

Please refer to the Herdio SZJW-HCS5022 5.25-inches 2-Way Ceiling Speakers User Guide for more detailed instructions and illustrations on the installation process.