User Manual Q&AAnswer
Jan 06, 2025 - 08:59 PM
To connect the Pyle PDIC60 ceiling speakers to an amplifier, please follow these steps:
1. Start by drilling a hole in the ceiling for the wires. Make sure to shut off the breaker and ensure that the amplifier is unplugged before proceeding.
2. Connect the wiring. Attach one end of the speaker wires to the speaker terminals in the ceiling. Each speaker should have a corresponding (+) and (-) terminal. Connect the red wire to the (+) terminal and the black wire to the (-) terminal.
3. Connect the other end of the wires to the amplifier's terminals. The amplifier should also have corresponding (+) and (-) terminals. Connect the red wire to the (+) terminal and the black wire to the (-) terminal.
4. Once all the connections are made, turn on the breaker and test the speakers by playing audio through the amplifier.
Please refer to the instruction manual for more detailed information and diagrams on speaker connections.
Note: It is always recommended to consult a professional or qualified installer if you are unsure about the installation process.
Add New Comment