How do I connect the NakiRadio MN300 Solo to a Wi-Fi network? (NakiRadio MN300 Wi-Fi Internet Radio User Manual)

Answer

manuals.plus

Jan 06, 2025 - 08:57 PM


To connect the NakiRadio MN300 Solo to a Wi-Fi network, please follow these steps:

1. Make sure your Wi-Fi router is turned on and working properly.
2. On the NakiRadio MN300 Solo, press the Menu button on the front panel or remote control to access the main menu.
3. Use the navigation buttons to select "Settings" and press the OK button.
4. In the Settings menu, select "Network" and press the OK button.
5. Choose "Wi-Fi" and press the OK button.
6. The NakiRadio MN300 Solo will start scanning for available Wi-Fi networks. Wait for the scan to complete.
7. Once the available networks are displayed, use the navigation buttons to select your desired Wi-Fi network and press the OK button.
8. If your Wi-Fi network is password-protected, a virtual keyboard will appear on the screen. Use the navigation buttons to enter your Wi-Fi password and press the OK button.
9. After entering the password, the NakiRadio MN300 Solo will attempt to connect to the selected Wi-Fi network. Wait for the connection to be established.
10. Once connected, the NakiRadio MN300 Solo will display a confirmation message on the screen.

Please note that the above instructions are a general guide, and the exact steps may vary slightly depending on the firmware version of your NakiRadio MN300 Solo. For more detailed information, please refer to the user manual provided with the product.