User Manual Q&AAnswer
Jan 06, 2025 - 08:55 PM
To attach an amplifier to the Pyle PDIC81RDBK ceiling speakers, follow these steps:
1. Drill a hole for the wires: Check to see that the amplifier is unplugged, then shut off the breaker. Install the wiring.
2. Start connecting the wires to the terminals on the ceiling speakers: The speakers and electronics terminals have corresponding (+) and (-) terminals. Connect the red wire to the (+) terminal and the black wire to the (-) terminal on each speaker.
3. Connect the wires' other side to the terminals of the amplifier: The amplifier should have corresponding (+) and (-) terminals. Connect the red wire to the (+) terminal and the black wire to the (-) terminal on the amplifier.
4. Start your breaker and give it a try: Once all the connections are made, turn on the breaker and power on the amplifier. Test the speakers by playing audio through them.
Please refer to the Pyle PDIC81RDBK Ceiling Wall Mount Speakers User Manual for more detailed instructions and diagrams on speaker connections and wiring.
Add New Comment