How do I install the Pyle Marine Vehicle Low Profile Waterproof speakers in my boat? (Pyle Marine Vehicle Low Profile Waterproof User Guide)

Answer

manuals.plus

Jan 06, 2025 - 08:36 PM


To install the Pyle Marine Vehicle Low Profile Waterproof speakers in your boat, follow these steps:

1. Determine the location: Choose a suitable location on your boat where you want to mount the speakers. Ensure that the area is dry and protected from direct exposure to water.

2. Measure and mark: Measure the dimensions of the speaker's cut-out and mark the location on your boat's surface. Use the provided speaker dimensions (8 inches overall diameter and 5 inches cut-out) as a reference.

3. Cut the hole: Using a suitable cutting tool, carefully cut out the marked area on your boat's surface to create a hole for the speakers. Make sure to follow the dimensions accurately.

4. Mount the speakers: Insert the speakers into the cut-out hole and secure them using the provided mounting hardware. Ensure that the speakers are flush with the surface and securely fastened.

5. Connect the wiring: Connect the included speaker wires to the speakers and route them to your audio system or amplifier. Follow the appropriate wiring diagram for your specific setup.

6. Test and adjust: Once the speakers are installed and wired, test them by playing some audio. Adjust the volume and sound settings to your preference.

Please refer to the Pyle Marine Vehicle Low Profile Waterproof user guide for more detailed instructions and illustrations on the installation process.