User Manual Q&AAnswer
Jan 06, 2025 - 06:10 AM
To install and set up the Simrad NSS16-Evo3S 16-inch Multifunction Fish Finder Chartplotter, follow these steps:
1. Mounting the Chartplotter:
- Choose a suitable location for mounting the chartplotter, ensuring it is easily visible and accessible.
- Use the provided template to mark the mounting holes.
- Drill the holes and secure the chartplotter using the supplied screws.
2. Connecting Power:
- Connect the power cable to the chartplotter's power connector.
- Connect the other end of the power cable to a suitable power source, following the recommended wiring practices.
3. Connecting Transducers:
- Determine the type of transducer you have (e.g., CHIRP, StructureScan, etc.).
- Connect the transducer cable to the appropriate transducer port on the chartplotter.
- Secure the connection using the locking ring.
4. Connecting Network Devices (optional):
- If you have other Simrad devices to connect, use Ethernet cables to create a network.
- Connect the Ethernet cables to the chartplotter's Ethernet ports and the corresponding ports on the other devices.
5. Powering On:
- Turn on the boat's power supply.
- Press and hold the power button on the chartplotter until the Simrad logo appears.
6. Initial Setup:
- Follow the on-screen prompts to set up the chartplotter.
- Select your preferred language, units of measurement, and other settings.
7. Chartplotter Operation:
- Refer to the Simrad NSS16-Evo3S Operation Manual (provided in the link) for detailed instructions on using the chartplotter's features, such as navigating menus, creating waypoints, setting routes, and interpreting fishfinder sonar.
Please note that the above steps provide a general overview of the installation and setup process. For specific details and illustrations, it is highly recommended to refer to the complete Simrad NSS16-Evo3S 16-inch Multifunction Fish Finder Chartplotter Operation Manual provided in the link.
Add New Comment