User Manual Q&AAnswer
Jan 06, 2025 - 06:00 AM
To connect your Pyle PRJLEDLP205 Digital Projector to your computer, follow these steps:
1. Make sure both the projector and your computer are turned off.
2. Locate the VGA or HDMI port on the back of the projector.
3. Use a VGA or HDMI cable (depending on the available ports on your computer) to connect one end to the corresponding port on the projector.
4. Locate the VGA or HDMI port on your computer. If your computer has both ports, choose the one that matches the cable you are using.
5. Connect the other end of the cable to the VGA or HDMI port on your computer.
6. Turn on your computer and then turn on the projector.
7. Use the projector's remote control or the control buttons on the projector to select the correct input source. For VGA connection, select "VGA" as the input source. For HDMI connection, select "HDMI" as the input source.
8. Your computer's display should now be projected onto the screen.
For more detailed instructions and troubleshooting tips, please refer to the Pyle PRJLEDLP205 Digital Projector Instructions Manual provided in the link above.
Add New Comment