User Manual Q&AAnswer
Jan 06, 2025 - 05:38 AM
To connect your Kanto YU4MW Bluetooth speakers to a Bluetooth device, please follow these steps:
1. Press the Bluetooth button on the YU4MW remote to select Bluetooth as the input source. The Bluetooth LED on the front panel of the speakers will start flashing, indicating that the speakers are in pairing mode.
2. Enable Bluetooth on your phone or tablet and make sure it is discoverable.
3. On your phone or tablet, search for available Bluetooth devices. Select "YU4MW by Kanto" from the list of available devices.
4. If the pairing is successful, the Bluetooth LED on the front panel of the speakers will remain solid. The speakers are now connected to your Bluetooth device.
5. You do not need to pair the same Bluetooth device again in the future. The speakers will remember the device and automatically connect to it when in range.
If the pairing is not successful, try the following:
- Turn off Bluetooth on your device and turn it back on again.
- Turn the speakers' ON/OFF switch to the OFF position, then repeat the pairing process from step 1.
- Press the Bluetooth reset button on the remote to reset the Bluetooth connection.
For more detailed information and troubleshooting tips, please refer to the Kanto YU4MW Bluetooth Speakers User Manual provided.
Add New Comment