User Manual Q&AAnswer
Jan 06, 2025 - 05:36 AM
To connect your YU4 Bluetooth speakers to your device, follow these steps:
1. Press the Bluetooth button on the YU4 remote to select Bluetooth as the input source. The Bluetooth LED on the front panel of the speakers will start flashing, indicating that the speakers are in pairing mode.
2. Enable Bluetooth on your phone or tablet and search for available devices to pair with. Look for "YU4 by Kanto" in the list of available Bluetooth devices.
3. Select "YU4 by Kanto" from the list to initiate the pairing process. If the pairing is successful, the Bluetooth LED on the speakers will remain solid.
4. Once paired, you will not need to pair the same device again in the future. The speakers will remember the device and automatically connect when in range.
Note: If the speakers do not pair with your device, make sure the speakers are in pairing mode (Bluetooth LED flashing) and try turning off Bluetooth on your device and turning it back on again. You can also press the Bluetooth reset button on the remote or turn off the speakers using the ON/OFF switch and repeat the pairing process.
For more detailed instructions and troubleshooting tips, please refer to the user manual provided with your YU4 Bluetooth speakers.
Add New Comment