User Manual Q&AAnswer
Jan 06, 2025 - 05:34 AM
To pair the camera with the parent unit on the VTech VM923 Video Baby Monitor, follow these steps:
1. Ensure that both the camera and parent unit are powered on and within range of each other.
2. On the parent unit, press the MENU button to enter the menu.
3. Use the up or down arrow buttons to navigate to the "Camera" option and press the SELECT button.
4. The parent unit will display a list of available cameras. If this is the first time pairing a camera, it will show as "Camera 1" by default.
5. Press the ADD button on the parent unit to start the pairing process.
6. On the camera unit, press and hold the PAIR button for about 3 seconds until the camera's LED indicator starts flashing.
7. The parent unit will search for the camera and display a progress bar. Once the pairing is successful, the camera's live video feed will appear on the parent unit's screen.
8. If you have additional cameras to pair, repeat steps 5-7 for each camera.
Note: If the pairing process fails, make sure that the camera and parent unit are within range of each other and try again. Also, ensure that the camera and parent unit are both using the same channel. The default channel is "Auto," but you can manually set the channel in the camera's menu if needed.
For more detailed instructions and troubleshooting tips, refer to the VTech VM923 Video Baby Monitor User Guide provided in the link.
Add New Comment