User Manual Q&AAnswer
Jan 06, 2025 - 05:24 AM
To pair your Braven B105 Bluetooth speaker with your device, follow these steps:
1. Make sure the speaker is turned off. If it's already on, long press the "O" button until you hear the speaker power off.
2. Press and hold the "O" button for a few seconds to turn on the speaker. The LED behind the grill will blink rapidly, indicating that it's in pairing mode.
3. Activate Bluetooth on your phone or device. Refer to your device's instruction manual for information on how to activate its Bluetooth settings.
4. Go to your phone or device's Bluetooth settings and select "BRAVEN 105" from the list of available devices.
5. If prompted for a passcode, enter "0000".
6. Once the pairing is successful, you will hear a single beep from the speaker, indicating that it's paired with your device.
Note: The Braven B105 can only remember one device at a time. If you want to pair it with a new device, you will need to follow the "New Device Pairing" instructions in the user guide.
If you're still having trouble pairing your Braven B105 Bluetooth speaker, make sure that Bluetooth is enabled on your device and that it's within range of the speaker. You may also try restarting both the speaker and your device. If the issue persists, refer to the troubleshooting section in the user guide or contact Braven customer support for further assistance.
Add New Comment