User Manual Q&AAnswer
Jan 06, 2025 - 05:12 AM
To assemble the AmScope M148C-E Compound Monocular Microscope, follow these steps:
1. Take the styrofoam container out of the cardboard carton and lay it on its side. Remove the tape and open the container carefully to avoid damaging the optical items.
2. Check that all parts and accessories are intact according to the packing list provided in the manual.
3. Remove the microscope body from the box and remove the plastic protective covering. The body of the microscope consists of the base, the stage, the arm, and the nosepiece.
4. xxxx the objectives into the microscope nosepiece from the lowest magnification to the highest, being careful not to touch the lenses.
5. Plug in the microscope and turn it on. If no light emerges from the light source, adjust the dimmer xxxx on the side of the base.
Once assembled, you can proceed to set up and use the microscope following the instructions provided in the manual.
Add New Comment