User Manual Q&AAnswer
Jan 06, 2025 - 04:47 AM
To connect your Infocus LP650 LCD Data Video Projector to your computer, follow these steps:
1. Ensure that both the projector and the computer are turned off.
2. Locate the VGA or HDMI port on your computer. The LP650 projector supports both VGA and HDMI connections.
3. Connect one end of the VGA or HDMI cable to the corresponding port on your computer.
4. Locate the VGA or HDMI input port on the projector. It is located on the back panel of the projector.
5. Connect the other end of the VGA or HDMI cable to the input port on the projector.
6. Turn on your computer and the projector.
7. Use the projector's remote control or the control panel on the projector to select the correct input source. Press the "Input" or "Source" button until the VGA or HDMI input is selected.
8. Adjust the projector's focus and zoom settings, if necessary, to ensure a clear image.
9. Your computer's display should now be projected onto the screen or surface connected to the projector.
For more detailed instructions and troubleshooting tips, please refer to the user guide provided with the Infocus LP650 LCD Data Video Projector.
Add New Comment