User Manual Q&AAnswer
Jan 06, 2025 - 04:44 AM
To connect your Victrola VTA-245B-FOT Bluetooth turntable to external speakers, you have a few options depending on the type of speakers you have.
1. Bluetooth Speakers: If your external speakers have Bluetooth capability, you can pair them directly with the turntable. Make sure the Bluetooth function is enabled on your speakers and follow the instructions in the manual to connect them to the turntable.
2. Wired Speakers: If your external speakers do not have Bluetooth capability, you can use the RCA Line Out jacks on the rear of the turntable to connect them. Here's how:
a. Reduce the volume level on the turntable to minimum.
b. Insert the white and red plugs of an RCA cable into the corresponding colors on the Line Out jacks of the turntable.
c. Insert the other end of the RCA cable into the input jacks of your external speakers. Be sure to connect the white plug to the white jack and the red plug to the red jack.
d. Adjust the volume on your external speakers and the turntable to the desired level.
3. Amplifier or Receiver: If you have an amplifier or receiver with Bluetooth capability, you can connect the turntable to it using the RCA Line Out jacks as described above. Then, pair your amplifier or receiver with your Bluetooth speakers to enjoy the sound from the turntable wirelessly.
Please refer to the "Rear View" section of the owner's manual for a visual representation of the Line Out jacks and their location on the turntable.
Note: If you are using wired speakers or an amplifier/receiver, make sure the Bluetooth function on the turntable is turned off to avoid interference.
For more detailed instructions and troubleshooting tips, please refer to the "Setup/Basic Operation" and "Bluetooth (BT) Operation" sections of the owner's manual.
Add New Comment