User Manual Q&AAnswer
Jan 06, 2025 - 03:29 AM
To install the battery in the SANZUCO Walkie Talkies Two-Way Radio, please follow these steps:
1. Make sure the transceiver is turned off.
2. Hold the belt clip to open it.
3. Install the two protrusions on the top of the battery into the aluminum groove of the transceiver as shown by the arrow.
4. Close the battery button until you hear a "ka" sound to finish the installation.
Note: If the battery is not fixed well, please remove it and reinstall it.
For more detailed instructions and illustrations, please refer to the "Installation/Removal of the Battery" section in the SANZUCO Walkie Talkies Two-Way Radio USER MANUAL.
Add New Comment