User Manual Q&AAnswer
Jan 06, 2025 - 03:27 AM
To connect your Pyle PDICBT87 Bluetooth ceiling speakers to your amplifier, follow these steps:
1. Ensure that your amplifier is unplugged and the breaker is turned off for safety.
2. Drill a hole in the wall for the speaker wires, taking care to avoid any electrical wiring.
3. Install the speaker wiring by running it from the amplifier location to the desired speaker location.
4. Connect one end of the speaker wire to the terminals on the back of the Pyle PDICBT87 active speaker.
5. Connect the other end of the speaker wire to the corresponding terminals on the amplifier.
6. Repeat steps 4 and 5 for the passive speaker, ensuring that the speaker wire is connected to the correct terminals.
7. Once all connections are made, turn on the breaker and power on the amplifier.
8. Test the speakers by playing audio through your amplifier. Adjust the volume and settings as desired.
For more detailed instructions and illustrations, please refer to the user guide provided with the Pyle PDICBT87 Bluetooth ceiling speakers.
Add New Comment