User Manual Q&AAnswer
Jan 06, 2025 - 03:26 AM
To install the Klipsch RW-5802 II IW SUB In-Wall Speaker, follow these steps:
1. Cut the appropriate size opening in the wall or ceiling using the template provided. If the template is not available, cutout dimensions are provided on the Klipsch website. Be careful not to cut through any existing wiring or plumbing.
2. Run speaker wiring (18 gauge minimum) to the openings, ensuring compliance with all building codes in your area.
3. Attach the wire to the speaker using the wire's color coding or markings as a guide to maintain proper polarity.
4. Insert the speaker assembly into the opening and tighten the six Phillips screws. The frame's six "dogs" will swivel out and secure the wall and frame together. Use a low torque setting if using a power tool to avoid damaging the speaker.
5. Optionally, paint the speaker grille before attaching it to the speaker. Use the supplied clear paint shield to protect the speaker baffle and drivers. Avoid excessive paint build-up in the grille perforations. Remove the scrim material attached to the inner surface of the grille before painting and reinstall it after the paint is dry.
6. Press the grille into place.
For more detailed instructions and safety information, please refer to the Klipsch RW-5802 II IW SUB In-Wall Speaker User Manual.
Add New Comment