User Manual Q&AAnswer
Jan 06, 2025 - 03:02 AM
To connect your Mitsubishi XD360U-EST DLP Projector to a computer, follow these steps:
1. Make sure both the projector and the computer are turned off.
2. Locate the computer's video output port. This is usually a VGA or HDMI port.
3. Connect one end of the appropriate video cable (VGA or HDMI) to the computer's video output port.
4. Locate the corresponding video input port on the projector. The XD360U-EST DLP Projector has VGA and HDMI input ports.
5. Connect the other end of the video cable to the projector's video input port.
6. Turn on the projector and the computer.
7. On the projector's remote control, press the "Input" button to select the correct input source (VGA or HDMI) that matches the connection you made.
8. The projector should now display the computer's screen. If not, check the cable connections and ensure that the computer's display settings are correctly configured.
For more detailed instructions and illustrations, please refer to the user manual of the Mitsubishi XD360U-EST DLP Projector.
Add New Comment